Knot Library
Binding & joiningBeginner

Sheet Bend

Joins two ropes, especially when they are of different diameters or stiffness.

Original schematic · steps are authoritative

Your progress

Sign in to track this knot.

Sign in to track

Step by step

  1. 1

    Form a bight in the thicker rope.

  2. 2

    Pass the thinner rope up through the bight from underneath.

  3. 3

    Wrap the thinner rope around behind both legs of the bight.

  4. 4

    Tuck the thinner rope under itself on the front, leaving the short end inside the bight.

  5. 5

    Tighten and check both short ends sit on the same side.

Description

The thicker rope forms a bight and the thinner rope wraps and tucks around it. Both short ends must finish on the same side of the knot for it to hold securely.

Intended use

Extending a line, joining cord to webbing, attaching a line to a loop or eye, net-making.

Safety

For slippery line, unequal diameters, or critical loads, use a double sheet bend (two wraps) or add a stopper knot to each short end.

Common mistakes

  • · Ends finishing on opposite sides
  • · Using a single sheet bend on slick synthetic cord

Related knots

BUSHCRAFTPLUS // LEARN. RESPECT. SHARE.

Feedback